Table of Contents
Advertisement
3
Configuring the IP30
2. Click the Servers tab.
3. In the Allow column, select the check box of the desired
4. To allow only connections made through a VPN, select the
5. In the Host IP text box of the selected service or application
6. Click Apply.
A success message appears, and the selected computer is allowed to
run the desired service or application.
66
The Virtual Servers page appears, displaying a list of services
and a host IP address for each allowed service.
service or application.
If you are using IP30 Satellite, the appropriate check box in the
VPN Only column is enabled.
VPN Only check box.
type the IP address of the computer that will run the service
(one of your network computers) or click the corresponding
This Computer button to allow your computer to host the
service.
Nokia IP30 User Guide
Advertisement
Table of Contents
