Analog Devices AD9683 Manual page 13

Analog-to-digital converters

Table of Contents

Figure 10. SPI Controller, ADCBase0

Note that other settings can be changed on the ADCBase0 tab (see Figure 10) and the ADCBase1

and ADCBase2 tabs (see Figures 11 and 12) to set up the part in the desired mode. The

ADCBase0 tab settings affect ADC settings, whereas the settings on the ADCBase1 and

ADCBase2 tabs affect the JESD204B link settings. See the appropriate part data sheet, the

AN-878

Application

Note, High Speed ADC SPI Control Software, and the

AN-877 Application

Note,

Interfacing to High Speed ADCs via SPI, for additional information on the available settings.

Rev 05 Jun 2013 16:37 | Page 13

Table of Contents

Need help?

Do you have a question about the AD9683 and is the answer not in the manual?

Ad6677