Confirm Your Wireless Network Setup Method; Configuration Using The Machine's Control Panel Setup Wizard To Configure Your Wireless Network Machine; Configuration Using The Ses/Wps/Aoss Control Panel Menu (Automatic Wireless Mode) (Infrastructure Mode Only) - Brother Network MFC-7840W Network User's Manual

Confirm your wireless network setup method

There are four methods to configure your machine for a wireless network; by using the machine's control
panel (recommended), using SES, WPS or AOSS from the control panel menu (Automatic Wireless mode),
using the PIN Method of Wi-Fi Protected Setup™ or using the Brother installer application. The setup
process will be different depending on your network environment.
Configuration using the machine's control panel Setup Wizard to configure
your wireless network machine
We recommend that you use the machine's control panel to configure your wireless network settings. By
using the control panel Setup Wizard function, you can easily connect your Brother machine to your
wireless network. You must know your wireless network settings before you proceed with this installation.
See Using the Setup Wizard from the control panel on page 29.
Configuration using the SES/WPS/AOSS control panel menu
(Automatic Wireless mode) (Infrastructure mode only)
If your wireless access point (A) supports either SecureEasySetup™, Wi-Fi Protected Setup™ (PBC
AOSS™, you can configure the machine without a computer. See Using the SES/WPS/AOSS control panel
menu to configure your machine for a wireless network (Automatic Wireless mode) on page 32.
1
Push Button Configuration
Configuring your machine for a wireless network
3
3
3
3
1
) or
26