Confirm Your Wireless Network Setup Method; Configuration Using The Brother Installer Application On The Cd-Rom To Configure Your Machine For A Wireless Network (Recommended) - Brother HL-3075CW User Manual

Confirm your wireless network setup method

There are three methods to configure your wireless network machine. Use the Brother installer application
on the CD-ROM (recommended). Use the one-push wireless setting mode or use the PIN Method of Wi-Fi
Protected Setup. The setup process will be different depending on your network environment.
Configuration using the Brother installer application on the CD-ROM to
configure your machine for a wireless network (Recommended)
We recommend that you use the Brother installer application on the CD-ROM we have provided with the
machine. By using this application, you can easily connect your machine to your wireless network and install
the network software and printer driver which you need to complete the configuration of your machine for a
wireless network. You will be guided by the on-screen instructions until you are able to use your Brother
wireless network machine. You must know your wireless network settings before you proceed with this
installation.
Configuration temporarily using a USB cable
You can temporarily use a USB cable to configure your Brother machine for your wireless network.
USB method
You can remotely configure the machine from a computer that is also on the network using a USB cable
1
(A) .
1
You can configure the wireless settings of the machine using a USB cable temporarily connected to a wired or wireless computer.
Configuring your machine for a wireless network (For HL-3075CW)
3
3
3
3
3
24