Set To Default - Brother Network MFC-7840W Network User's Manual

g
Press Stop/Exit.
Comm.Mode
This field displays the current wireless network communication mode; Ad-hoc or Infrastructure.
a
Press Menu.
b
Press a or b to choose LAN.
Press OK.
c
Press a or b to choose WLAN.
Press OK.
d
Press a or b to choose WLAN Status.
Press OK.
e
Press a or b to choose Comm.Mode.
Press OK.
f
The current wireless network communication mode will be displayed; Ad-hoc or Infrastructure.
g
Press Stop/Exit.

Set to Default

The Set to Default allows you to reset each wired or wireless settings to the default. If you want to reset
both wired and wireless settings, see Restoring the network settings to factory default on page 87.
a
Press Menu.
b
Press a or b to choose LAN.
Press OK.
c
(For Wired) Press a or b to choose Wired.
(For Wireless) Press a or b to choose WLAN.
Press OK.
d
Press a or b to choose Set to Default.
Press OK.
e
Press 1 to choose Reset.
f
Press Stop/Exit.
Control panel setup
6
6
6
84