Brother Network MFC-7840W Network User's Manual page 122

g
You can configure the POP3/SMTP settings on this page.
Note
• You can also change the SMTP port number using Web Based Management. This is useful if your ISP
(Internet Service Provider) implements the "Outbound Port 25 Blocking (OP25B)" service, and you are not
using the ISP's SMTP server. By changing the SMTP port number to a specific number which your SMTP
server decide (for example, port 587), you can still send an E-mail via the SMTP server you currently use.
You will also need to check SMTP-AUTH of SMTP Server Authentication Method to enable the SMTP
server authentication.
• If you can use both POP before SMTP and SMTP-AUTH, we recommend choosing SMTP-AUTH.
• If you choose POP before SMTP for the SMTP Server Authentication Method, you need to configure the
POP3 settings. You can also use the APOP method.
• For more information, see the Help text in the Web Based Management.
• You can also confirm whether the E-mail settings are correct after configuration by sending a test E-mail.
h
After configuring, click Submit. The Test E-mail Send Configuration dialog appears.
i
Follow the instructions on-screen if you want to test with the current settings.
Security features
12
113