Example 4: Sending The Alarm Voice - ICP DAS USA SMS-531 User Manual

5.4 Example 4: Sending the alarm voice

This example is shown how to send the defined voice alarm via the SMS-531.
1. Setting the parameters by the GT-531 Series Utility
(1) New and name an "Example4.prj" project in the Utility.
(2) Set the Modbus address as 1 (the factory default address is 1).
(3) Add 2 new phone groups and input phone numbers as follows:
(4) Set the "Voice Alarm" fields as enable in Alarm Channel0 and Alarm Channel1 as
follows.
SMS-531 User's Manual v1.1
- 45/60 -