D. SMS Check Number:
Disabling or enabling the check code for SMS. If the SMS-531 is applied with
the SMS DB system of ICP DAS, the check code function must be enabled
and user must add "ALARM;" to the start of the short message.
E.
Variable SMS:
Disabling or enabling the function for changing the content of the transmitting
SMS. If enabling this function, the SMS content is the defined message in the
"Alarm message" and the changeable content from communication. The
defined message is max 54 characters. The changeable message is max 16
characters. The total message is max 70 characters.
F.
Alarm Mode:
(1) Level Trigger:The SMS will be sent when SMS-531 receive command.
(2) Edge Trigger:When the alarm status change, the SMS will be sent. (It's
support Alarm Trigger Time.)
SMS-531 User's Manual v1.1
- 19/60 -