Advertisement
Quick Links
Package checklist
The package includes the following items:
One SMS-531 hardware module
One GSM Antenna (ANT-421-02)
One RS-232 cable (CA-0910)
One Quick Start
One software utility CD
One screw driver
One Micro SD card
Note:
If any of these items are missed or damaged, contact the
local distributors for more information. Save the shipping
materials and cartons in case you want to ship in the future.
Appearance and pin assignments
Power Input
Terminal
No.
N/A
GND
Initial
Power Input:
10 ~ 30 VDC
Frame Ground
Pin
Assignment
01
N/A
02
N/A
03
N/A
04
GND
05
Init
06
DC.+VS
07
DC.GND
08
F.G
SMS-531 Quick Start v1.0 2013/01
COM Port
Terminal
No.
01
COM3
RS-485
02
03
COM2
04
RS-232
05
N/A
06
07
COM1
RS-232
08
Quick Start
Jan. 2013 Version 1.0
Pin
Assignment
DATA-
DATA+
TxD2
RxD2
GND
N/A
TxD1
RxD1
1/8
Advertisement
Related Manuals for ICP DAS USA SMS-531
Summary of Contents for ICP DAS USA SMS-531
- Page 1 SMS-531 Quick Start v1.0 2013/01 Quick Start Jan. 2013 Version 1.0 Package checklist The package includes the following items: One SMS-531 hardware module One GSM Antenna (ANT-421-02) One RS-232 cable (CA-0910) One Quick Start One software utility CD ...
-
Page 2: Installation
Blinking per 50 ms Note: When the SMS-531 sends voice alarm, the 3G LED is continuous on. Installation If users want to start SMS-531 normally, it needs to follow these steps to install the SMS-531 below: 1. Install the antenna 2. - Page 3 SMS-531 Quick Start v1.0 2013/01 GT-531 Series Utility It needs the runtime environment with .NET Framework 2.0 or above to execute the GT-531 Series Utility in the PC. Install .NET Compact Framework Install GT-531 Series Utility...
- Page 4 Blanking per 50 ms PIN/PUK code in the GT-531 Series Utility. 2. Confirm the RS232 connection between SMS-531 and PC is correct. Users can refer to the following figure. 3. During the setting procedure, the external power must be turn on.
- Page 5 (5) The result for operating the functions SMS-531 Modbus address Table The Modbus function codes supported in the SMS-531 are 1, 2, 3, 4, 5, 6 and 16. The Modbus address distribution is as the following table. Coil Status (Function Code:1, 5)
- Page 6 SMS-531 Quick Start v1.0 2013/01 Discrete Input (Function Code: 2) Data Address Description Attribute Address The status of transmitting SMS buffer 0：No 10001 1：Overflow The indication of the received SMS 0：No received SMS 10002 1：Having received SMS The status of SD card 0：No SD card or Error...
- Page 7 SMS-531 Quick Start v1.0 2013/01 30041 ~ 0x28 ~ The date and time of receiving SMS 30047 0x2E The format of the received SMS 30048 0x2F 0x0000=ASCII , 0x0001=Unicode 30049 ~ 0x30 ~ The content of the received SMS ASCII： By end char 0x00 , Unicode：By end char 0x0000...
-
Page 8: Troubleshooting
SMS-531 SMS DBS could not received the User must add “ALARM;” to the start of the short message. SMS from SMS-531 Technical Support If you have problems about using the SMS-531, please contact ICP DAS Product Support. Email: Service@icpdas.com...