Led's - Vidicode V-Mic Manual

4 LED's

Red LED steady on: To indicate an error. If the Red LED is on, the device
is not booting or an SD card is not detected.
Red LED flashing: To indicate a problem; either the SD card is full or the
write-protect is enabled.
Green LED steady on: To indicate that the device is recording. Do not
remove power from the device during recording, otherwise the recorded
data is lost.
Green LED flashing: To indicate that the device is in automatic
recording mode and that it is waiting for audio. If there is enough sound
to trigger a recoding, the Green LED will turn steady.
Blue LED steady on: To indicate a network connection. Either Wi-Fi or
Ethernet is successfully connected.
Blue LED flashing: To indicate network activity. The device is now
sending a recording to either an Apresa or the V-Archive software.
Orange LED steady on: To indicate that the device is on and powered.
Orange LED flashing: To indicate that the device is in 'config-mode' and
can be accessed with Wi-Fi.
All LED's are flashing: The V-Mic is in
V-Mic Manual EN v1.5 Juli 2020
Firmware Update
© 2020 Vidicode
mode.
17