Technical Specifications - Vidicode V-Mic Manual

6 Technical Specifications

POWER
- Power consumption 2W maximal.
- The unit can be powered in 3 ways: PoE , DC plug , USB.
DC plug
- Voltage 8.....14VDC (2W max)
- Reverse polarity & overcurrent protection
- Size 2.1x5,5m, hot centered
LAN
- Ethernet IEEE802.3
- Speed 10 or 100Mbit/s
- 100Base-TX
- Cable length < 100m
- Auto DMI/DMIX
- RJ45 with GREEN led (function=LINK ON) and YELLOW led (function=ACTIVITY)
- POE Class 1 presentation to PSE (e.g. the connected switch)
- POE implementation according to standard IEEE802.3at (POE+)
Wi-Fi
- 2.4GHz band (certified FCC/CE/IC/TELEC/KCC/SRRC/NCC)
- Internal antenna, max 21.5 dBm power
USB
- V2.0 (programming and power supply function only)
- Connector USB 'B' type
SD card
- Full size card up to 32GByte
- Voice files are stored in .WAV format
Built-in MIC
- Type = Electret
- Bandwidth 4/8/16 KHz
- Balanced interfaced
- Phantom power has cascaded filtering for low noise
MIC1 jack (6.35mm)
- Intended use: MONO balanced microphone
- Connector Female 1/4 INCH TRS (T=NEG , R=POS, S=Ground )
- Input Sensitivity 5-50mV (depends on setting)
- Impedance 6K8
- Bandwidth 4/8/16 KHz
- Max cable length <20m
- Phantom Power 48V / 20mA max, software controlled on/off
MIC2 jack (3.5mm)
- Intended use: ordinary 'PC'-style MONO Electret microphone
- Connector Female 3.5mm TRS (T=SIG , R=POW, S=Ground )
- Input Sensitivity 5-50mV (depends on setting)
- Impedance 2K2
- Bandwidth 4/8/16 KHz
- Max cable length <2m
- Phantom Power 3V via ring
V-Mic Manual EN v1.5 Juli 2020 © 2020 Vidicode 22