Cleaning The Print Head; Figure 2-5 Remove The Paper; Figure 2-6 Open The Lid; Figure 2-7 Clear The Paper Jam - FutureLogic PSA-66-ST2 Technician Manual

To clear a paper jam:
1. Remove the paper from the printer.
2. Open the lid by pressing the Lid Release Lever.
The spring-loaded lid opens, exposing the paper path.
3. Remove the jammed ticket.
If necessary, access the paper path through the print mechanism by opening the
Mechanism Release Lever.
Mechanism
Release Lever
4. Once you clear the jam, reverse these steps to return the printer to a ready state.
5. Load the paper.

Cleaning the Print Head

To clean the print head, use canned air to blow out the paper particles. Then use a lint-free
cloth or cotton swab with isopropyl alcohol to clean the print head.
© 2002 – 2007 FutureLogic, Incorporated. All Rights Reserved.
Figure 2-5 Remove the Paper
Figure 2-6 Open the Lid
Figure 2-7 Clear the Paper Jam
Operators and Technicians Manual
Lid Release
Lever
Voucher Path
MNL Page 7 of 52 12/07/2007
MNL-000003 REV.N