Printer Cleaning; Introduction; Cleaning And Maintenance Do's And Don'ts; Required Cleaning Supplies - FutureLogic GEN2 Cleaning Manual

2 Printer Cleaning

Introduction

This chapter covers cleaning the printer. Most illustrations show a GEN2 Universal printer. Wherever
there is a difference for the GEN3 Evolution printer, additional illustrations are shown.

Cleaning and Maintenance Do's and Don'ts

Media Storage
Cleaning Tools
Cleaning Materials
Cleaning Card
Cleaning Swab
Cleaning Wipe
Cleaning Frequency
Cleaning Material

Required Cleaning Supplies

The Printer Cleaning Kit (P/N 350-00292-100) contains 10 each of Cleaning Swab, Cleaning Wipe, and
Cleaning Card.
Use the Cleaning Swabs and Cleaning Wipes with the Manual Cleaning Method. (See page 6.)
Additionally, have on hand if needed:
·
Isopropyl Alcohol (I.P.A.) 99% or greater
· Compressed Air to blow out dust from the print mechanism and sensors
ã 2010 – 2012 FutureLogic, Incorporated. All Rights Reserved.
Do Not store spare media (tickets) stacks inside the game.
within the game may cause stored tickets to experience print quality and/or
paper jam issues over
Do Not use sharp or abrasive objects when cleaning the Print Head, Platen
Roller, Pinch and Presenter Rollers.
Do Not use non-approved cleaners or detergents.
Do Not use the Cleaning Card more than once.
Do Not use the Cleaning Swab more than once.
Do Not use the Cleaning Wipe more than once.
Do use the Cleaning Card method every 3 months. (See page 4.)
Do perform the manual cleaning method generally two (2) times per year or
as required depending upon game and media conditions. (See page 6.)
Do use FutureLogic approved Cleaning Cards, Cleaning Wipes, and
Cleaning Swabs.
(GEN2™, GEN2 Universal™, and GEN3 Evolution® Printers)
time.
Printer Cleaning Guide
Ambient heat
PUBN Page 2 11/14/2012
MNL-000054 REV.D