Manual Cleaning (Print Head, Platen Roller, Presenter Roller) - FutureLogic GEN2 Manual

Manual Cleaning (Print Head, Platen Roller, Presenter Roller)

Use these procedures for manual cleaning. Otherwise, if the printer is still, for example, in a
game and powered, and you have a cleaning card, use the procedures in Alternative Cleaning
Card Method on page 4.
Print Head
Push Platen Release Lever
 2010 FutureLogic, Incorporated. All Rights Reserved.
Cotton Swab
!!WARNING!! You must pull open the
Platen Release Lever before cleaning
the Print Head and Platen Roller.
1. Use a 99% I.P.A., dampen, clean Cotton Swab to
clean across the Print Head.
Note: Only use a clean Cotton Swab on the
Print Head. Do not use a cleaning cloth.
2. Dampen a lint-free Cleaning Cloth with 99% I.P.A.
3. Wipe the exposed Platen Roller with the Cleaning Cloth.
4. Rotate the Platen Roller and repeat step 3 until the
entire roller is clean.
5. Push the Platen Release Lever back into position.
6. Dampen a lint-free Cleaning Cloth with 99% I.P.A.
7. Wipe the Presenter Rollers with the Cleaning Cloth.
8. Rotate the Presenter Rollers and repeat step 7 until
both rollers are clean.
Presenter Rollers
Printer Cleaning Guide
(GEN2™ and GEN2 Universal™ Printers)
PUBN Page 3 of 10 08/19/2010
MNL-000054 REV.X01