Keypad Status Light; Bezel Operation; Printer Sensor Functions; Table 2-1 Keypad Leds Status Reporting Printer Condition - FutureLogic PSA-66-ST2 Technician Manual

Keypad Status Light

The keypad LEDs report the status of the printer whenever power is present. Table 2-1 lists
each condition of the keypad LEDs.
Table 2-1
Printer is Powered Off
Printer Ready
Printer Flushed
Paper Out
Head Up or Ticket Module Open
Temperature Error
Voltage Error
Print Head Error
Missing Black Index Mark
Paper is Jammed

Bezel Operation

Use the front bezel display to determine the state of the printer while on the casino floor,
at a distance, without disturbing the game. Table 2-2 lists the conditions indicated on the
bezel display.
Bezel Display
Solid On
Slow Blink
Fast Blink
Off
See Chapter 4 for information on the current ratings of the bezel ports.

Printer Sensor Functions

There are six primary sensor functions on the printer. These sensors work with the game
firmware to provide reliable trouble-free operation. Any error conditions resulting from these
sensors are indicated by the front bezel light and keypad LEDs.
Table 2-3 describes each of these sensors.
Sensor
Paper Out The Paper Out sensor is located in the print head. It terminates the print operation
when the paper has run out and checks for proper form registration. The printer
ceases printing and feeding operations when it detects a Paper Out condition. Correct
a Paper Out condition by loading more paper into the unit.
Paper Low The Paper Low sensor is located in the paper well. It determines when the paper stack
has approximately 14 tickets remaining. The paper_low status reports a paper low
condition after the unit has printed out 10 more print jobs. The true condition of the
paper_low status can be check by recycle the power. A Paper Low condition
automatically resets once a stack with a greater height is loaded. Paper low sensing
occurs when the system is idle and takes a few seconds to detect the new paper level.
Paper Taken The Paper Taken sensor is located in the presentation chute of the printer. It
determines when the customer has actually taken their cashout ticket.
© 2002 – 2007 FutureLogic, Incorporated. All Rights Reserved.
Keypad LEDs Status Reporting Printer Condition
Condition
Indicates the LED is ON.
Table 2-2
Printer Idle and Ready
Paper Low or Printer Error
Ticket Printing and/or Ticket in Chute
Printer power off
Table 2-3
Operators and Technicians Manual
Ready Paper
blink
Bezel Display Status
Status
Sensors
Description
Open Fault
blink
MNL Page 3 of 52 12/07/2007
MNL-000003 REV.N