Sending A Fax; Entering Fax Mode; Faxing From The Adf; Faxing From The Scanner Glass - Brother MFC-5490CN User Manual

5

Sending a Fax

Entering Fax mode

Press (Fax) to enter Fax mode.

Faxing from the ADF

a
Make sure you are in Fax mode
b
Place the document face up in the ADF.
(See Using the ADF on page 17.)
c
Enter the fax number using the dial pad,
One Touch, Speed Dial or Search.
d
Press Mono Start or Colour Start.
The machine starts scanning the
document.
Note
• To cancel, press Stop/Exit.
• If you send a mono fax when the memory
is full it will be sent in real time.
28

Faxing from the scanner glass

5
You can use the scanner glass to fax pages
of a book one at a time. The documents can
be up to Letter or A4 size.
You cannot send colour faxes with multiple
5
pages.
.
Note
Since you can only scan one page at a
time, it is easier to use the ADF if you are
sending a multiple page document.
a
Make sure you are in Fax mode
b
Load your document on the scanner
glass.
c
Enter the fax number using the dial pad,
One Touch, Speed Dial or Search.
d
Press Mono Start or Colour Start.
If you press Mono Start, the
machine starts scanning the first
page. Go to step e.
If you press Colour Start, the
machine starts sending the
document.
e
Do one of the following:
To send a single page, press 2 to
choose No (or press Mono Start
again).
The machine starts sending the
document.
To send more than one page,
press 1 to choose Yes and go to
step f.
f
Place the next page on the scanner
glass.
Press OK.
The machine starts scanning the page.
(Repeat step e and step f for each
additional page.)
5
5
.