Brother MFC-5490CN User Manual page 133

Error Message Cause
Hub is Unusable. A Hub or USB Flash memory drive
with Hub has been connected to the
USB direct interface.
The machine has a mechanical
Init Unable XX
problem.
—
OR
A foreign object such as a clip or
ripped paper is in the machine.
One or more ink cartridges are
Ink Low Black
running out of ink. If a sending
Ink Low Yellow
machine has a colour fax to send,
Ink Low Cyan
your machine's 'handshake' will ask
that the fax is sent as black & white.
Ink Low Magenta
If the sending machine has the
ability to convert it, the colour fax will
be printed at your machine as a
black & white fax.
Low Temperature The print head is too cold.
The memory card is either
Media Error
corrupted, incorrectly formatted, or
there is a problem with the memory
card.
The memory card or USB flash
Media is Full.
memory drive you are using already
contains 999 files.
There is no incoming call history.
No Caller ID
You have not received any calls, you
have not activated the Caller ID
feature on your machine, or you
have not subscribed to the Caller ID
service from your telephone
company.
An ink cartridge is not installed
No Cartridge
correctly.
The memory card or USB Flash
No File
memory drive in the media drive
does not contain a .JPG file.
—
Troubleshooting and Routine Maintenance
Action
A Hub or USB Flash memory drive with Hub are
not supported. Unplug the device from the USB
direct interface.
Open the scanner cover and remove any foreign
objects inside the machine. If the error message
continues, see Transferring your faxes or Fax
Journal report on page 125 before disconnecting
the machine so you will not lose any important
messages.
Then, disconnect the machine from the power for
several minutes, then reconnect it.
Order a new ink cartridge. You can continue
printing until the LCD shows Cannot Print.
(See Replacing the ink cartridges on page 129.)
Allow the machine to warm up.
Put the card firmly into the slot again to make
sure it is in the correct position. If the error
remains, check the media drive (slot) of the
machine by putting in another memory card that
you know is working.
Your machine can only save to your memory card
or USB flash memory drive if it contains less than
999 files. Try deleting unused files to free some
space and try again.
If you want to use the Caller ID feature call your
telephone company. (See Caller ID on page 43.)
(See Caller ID on page 45.) (See Caller ID (For
Singapore and Hong Kong) on page 48.)
Take out the new ink cartridge and re
slowly until it clicks. (See Replacing the ink
cartridges on page 129.)
Put the correct memory card or USB Flash
memory drive into the slot again.
B
-
install it
123