Removing Small Printouts From The Machine - Brother MFC-5490CN User Manual

How to load envelopes and post cards
a
Before loading, press the corners and
sides of envelopes or post cards to
make them as flat as possible.
Note
If envelopes or post cards are
'double-feeding', put one envelope or post
card in the paper tray at a time.
b
Put envelopes or post cards into the
paper tray with the address side down
and the leading edge in first as shown in
the illustration. Press and slide the
paper side guides (1) and paper length
guide (2) to fit the size of the envelopes
or post cards.
If you have problems when printing on
2
envelopes, try the following suggestions:
a
Make sure the flap is either to the side of
the envelope or to the back edge of the
envelope when printing.
b
Adjust the size and margin in your
application.
1
Removing small printouts
from the machine
When the machine ejects small paper onto
the output paper tray you may not be able to
reach it. Make sure printing has finished, and
then pull the tray completely out of the
machine.
2
Loading paper and documents
2
2
2
11