Fastening Of The Back Mounting Plate - ABB ACS800 Installation Manual
Rittal ts 8 cabinet installation
Hide thumbs
Also See for ACS800:
- Firmware manual (340 pages) ,
- Hardware manual (210 pages) ,
- Cabinet installation and operating instruction (162 pages)
Table of Contents
Advertisement
Fastening of the back mounting plate
Fasten the back mounting plate to the enclosure
frame at a distance of 70 mm from the back vertical
profiles. The attachment in the lower left-hand side
corner is shown here.
View of the enclosure ftame when the back mounting plate
(without the drive module) is fastened
ProE: White Currant / acs800-04-rittal_common.asm, _common_no_heat.asm
Drive module of frame size R7 with bottom exit
21
Fastening
points of
the drive
module
Advertisement
Table of Contents
Need help?
Do you have a question about the ACS800 and is the answer not in the manual?
Questions and answers