Routine Maintenance; Main Brush - Roborock S5 Max User Manual

Instructions for use
Charging dock
The charging dock should be plugged in and placed against
a wall on level ground, with more than �.�m (�.�ft) of clear-
ance on each side, and more than �.�m (�ft) in front. For the
best experience when using the mobile app, place the
charging dock in an area with strong WiFi coverage.
Locator beacon
More than �.�m(�.�ft)
More than �.�m(�ft)
Note:
Do not place the charging dock in direct sunlight or block the locator beacon; other-
wise, the robot may not be able to return to the charging dock.

Routine maintenance

Main brush

* Clean weekly
�. Turn the robot over then unlatch and remove the main
�. Take out the main brush, remove and clean its bearings.
�. Remove the main brush cap, rotating in the unlock direction.
�. Use the supplied main brush cleaning tool to remove any
�. Re-install the cap and bearings following the lock direction.
�. Re-insert the main brush and replace the brush cover.
More than �.�m(�.�ft)
Note:
Main brush replacement every �-�� months is recommended.
��
brush cover.
entangled hair.
Lock direction
Unlock direction
Alignment
mark
Main
brush bearing
Main brush
cover
Latch
Main brush
Main brush
cap