Related Manuals for Roborock S8
Summary of Contents for Roborock S8
- Page 1 Roborock S8 Robotic Vacuum Cleaner User Manual Read this user manual with diagrams carefully before using this product and store it properly for future reference.
- Page 3 English Français Deutsch Italiano Español Polski Norsk Svenska...
-
Page 4: Table Of Contents
English Contents 05 Restrictions 06 Product Overview 07 Installation 08 Connecting to the App 08 Instructions 10 Routine Maintenance 11 Basic Parameters 12 Common Issues... -
Page 5: Restrictions
Restrictions WARNING • For the purposes of recharging the battery, only use the detachable supply unit roborock CDZ12RR, CDZ20RR, AED06HRR or AED07HRR provided with this product. • Do not use this product on elevated surfaces without barriers such as the floor of a loft, an open-ended terrace, or on top of furniture. -
Page 6: Product Overview
Product Overview A2-3—Omnidirectional Wheel A5-2—Dock Location Beacon A2-4—Charging Contacts A5-3—Charging Contacts A2-5—Side Brush A5-4—Power Socket Robot (Top View) A2-6—Main Brushes A5-5—Electrode Brushes A2-7—Main Brush Cover Power/Clean Power Cable A2-8—Main Wheels • Press and hold to turn the robot on or off Robot (Upper Cover Electric Water Tank •... -
Page 7: Installation
Installation Secure the charging dock 1. Tidy cables and loose items from the ground and move any unstable, fragile, with the adhesive tape precious, or dangerous items to prevent Important Information Wipe the floor of the area where the personal injury or property damage due charging dock will be placed with a dry cloth, to items becoming tangled in, struck by, then secure the dock in place using double-... -
Page 8: Connecting To The App
WiFi and add your robot as a new device. Notes: ❸ Add device • To prevent corrosion or damage, only use the Roborock This robot supports both Roborock and branded floor cleaner in the water tank. • Do not use hot water as this may cause the tank to deform. - Page 9 Starting Cleaning Spot Cleaning Notes: • The robot will not go to sleep when it is charging. Press the button to start cleaning. The • The robot will automatically shut down if left in sleep mode Press the button to start spot cleaning. robot will plan its cleaning route according for more than 12 hours.
-
Page 10: Routine Maintenance
Routine Omnidirectional Wheel Error * Clean as required. Maintenance If an error occurs, the power indicator will C3-1— Use a tool, such as a small screwdriver, flash red and a voice alert will sound. to pry out the axle and take out the Main Brushes Notes: wheel. -
Page 11: Basic Parameters
Basic Parameters Charging Contact Areas C6-2— Rinse the filter repeatedly and tap it to remove as much dirt as possible. * Clean monthly. Robot Use a soft dry cloth to wipe the charging Note: Do not touch the surface of the filter with your hands, brush, or hard objects to avoid potential damage. -
Page 12: Common Issues
WiFi • The current Roborock robot is not supported. You can find supported models in the app. • Unable to connect to WiFi abruptly. There may be an error with your router settings. Contact Roborock customer service for additional support. - Page 13 Common Issues Solution Problem Is power always being drawn when the • The robot will draw power while it is docked to maintain battery performance, but power robot is on the charging dock? consumption is minimal. Does the robot need to be charged for at least 16 hours the first three •...
Need help?
Do you have a question about the S8 and is the answer not in the manual?
Questions and answers