Roborock S5 Max User Manual page 16

Instructions for use
No-go zones / Invisible Wall / Mopping
No-Go Zone
The app can be used to draw Virtual No-Go Zones and Walls,
as well as Virtual No-Mop Zones and Walls to keep the robot
from entering the areas you define. Virtual No-Mop Zones
and Walls are only activated when the mopping cloth bracket
is installed.
Note:
· "Map Saving Mode" must be turned on in the app to use virtual no-go zones.
· Virtual no-go zones and walls should only be used to customize the cleaning
area. They should not be used to isolate hazards.
· Moving the robot manually or making significant changes to the home environ-
ment may cause the loss of Virtual No-Go Zones and Walls.
Invisible Wall
No-go zones Mopping No-Go Zone
More app functions
Real-Time Map Updates
Change Cleaning Mode
View Cleaning History
Change Robot Voice
Note:
Functions and details of the app may vary slightly due to continuous app devel-
opment and upgrades.
Refilling the water tank or cleaning the
mopping cloth midway
To refill the water tank or clean the mop cloth during a clean-
up, pause cleaning by pressing any button and remove the
mop module. Refill the water tank and/or clean the mop
cloth as required. Reinstall the mop module and press the
button to continue cleaning.
��
Carpet Boost Robot Location
Part Replacement Do Not Disturb
Schedule (DND) mode
Remote Control Firmware Update
View robot status