Roborock S5 Max User Manual page 11

Installation
Using the robot
�. Mopping
Note:
It is recommended that all floors are vacuumed at least three times before
the first mopping session to reduce excessive dirt buildup on the mop.
Remove the water tank
�
Press down the water tank latch and slide the tank back-
wards to remove it.
Fill the water tank
�
Open the water tank, fill it with water, and close it tightly.
Note:
· To prevent corrosion or damage, do not use cleaning fluid or disinfectant
in the water tank.
· Do not use hot water, which may cause the tank to deform.
Install the water tank
�
Slide the water tank into the robot until you hear it lock
with a click.
Install the mop cloth
�
If mopping immediately, dampen the mop cloth and
squeeze it dry then attach it to the mop cloth bracket.
Note:
Use a barrier tape or no-mop zones to separate prevent mopping on carpeted
floors.
��