4
Making Pre-installation Checks > Cautions at the Installation
How to Utilize This Installation Procedure
Description Used in This Procedure
• In this procedure, Finisher and Staple Finisher are inclusively called the fi nisher.
• In this procedure, Saddle Finisher and Booklet Finisher are inclusively called the saddle
finisher.
When Using the Parts Included in the Package
A symbol is described on the illustration in the case of using the parts included in the package
of this product.
Packaged Item
Symbols in the Illustration
The frequently-performed operations are described with symbols in this procedure.
Screw
Connector
Tighten
Remove
Connect
Claw
Insert
Remove
Push
Checking instruction
Check
Visual Check
Sound Check
4
Making Pre-installation Checks > Cautions at the Installation
F-4-1
Harness
Secure
Free
Disconnect
Plug in
Turn on
F-4-2
Product Name
Safety regulations require the product's name to be registered. In some regions where this
product is sold, the following name may be registered instead.
• F280260
Making Pre-installation Checks
Cautions at the Installation
1. Check that the main power swith is OFF.
1) Turn OFF the main power switch of the Host Machine.
2) Be sure that the Control Panel Display and the Main Power Lamp are both turned OFF,
and then disconnect the power plug.
4-2
4-2