How To Check This Installation Procedure; When Using The Parts Included In The Package; Symbols In The Illustration; Product Name - Canon K1 Service Manual

4
Installation > Making Pre-installation Checks

How to Check this Installation Procedure

When using the parts included in the package

A symbol is described on the illustration in the case of using the parts included in the package
of this product.
Packaged Item

Symbols in the illustration

The frequently-performed operations are described with symbols in this procedure.
Screw Connector
Tighten Remove Connect
Claw
Insert Remove Push
Checking instruction
Check Visual Check Sound Check
4 Installation > Making Pre-installation Checks
F-4-1
Harness
Disconnect Secure Free
Plug in Turn on
F-4-2

Product Name

Safety regulations require the product's name to be registered. In some regions where this
product is sold, the following names in parenthesis may be registered instead.
• Buffer Pass Unit-K1 (F280300)

Making Pre-installation Checks

Install the machine and then install "Booklet Finisher-M1" and "Staple Finisher-M1".
Refer to Installation Procedure Manuals of "Booklet Finisher-M1" and "Staple Finisher-M1"
for installation procedure of "Booklet Finisher-M1" and "Staple Finisher-M1".
4-2
4-2