Installation Procedure - Canon Puncher Unit-BE1 Service Manual

4
Installation Procedure > When installing to the finisher

Installation Procedure

When installing to the finisher
MEMO:
• The equipment is secured with
packaging tapes and cushioning
materials to protect it against
vibration and shock during
transportation. Remove all
packaging tapes and cushioning
materials before installing the
equipment.
• When installing to the saddle
finisher, refer to "When installing
to the saddle finisher".
4
Installation Procedure > When installing to the finisher
1) Open the front cover of the finisher.
F-4-5
2) Remove two screws, and then remove the right inner cover of the finisher.
x2
4-4
F-4-6
4-4