Table of Contents
Advertisement
4
Installation Procedure > When installing to the finisher
22) The following parts will be no longer needed once the
puncher unit has been installed.
<Included parts>
• Punch unit fixing pin (for saddle finisher): 1 pc.
• Screw (TP, M3 x 6): 1 pc.
<Removed parts from the finisher>
• Screw: 5 pcs.
• Magnet unit: 1 pc.
• Feed unit: 1 pc.
• Face cover of the right inner cover: 1 pc.
4
Installation Procedure > When installing to the finisher
4-10
4-10
Advertisement
Table of Contents
