Canon Puncher Unit-BE1 Service Manual page 19

2
Controls > Horizontal registration operation
3) Feeding of media is stopped when the inlet sensor (S106) detects the trailing edge of the
media and the media is switched back and bumped to the stopper and registered. Then the
punch motor (M102) is driven to punch the media.
4) When punching ends, the punch slide motor (M101) is reversed to return the punch slide
unit to home position and stopped.
5) The punch slide unit returns to the home position after punching each sheet and repeats
the above procedure even if the media is fed continuously.
2
Controls > Horizontal registration operation
Punch
2-9
2-9