Huawei UPS2000-G-6KRTS User Manual page 75

UPS2000-G- (6 kVA-20 kVA)
User Manual
●
Issue 18 (2021-07-16)
Figure 4-33 Self-Load screen
Table 4-23 Self-load settings
Item Description
Output This parameter is used only during the
power tests before shipment. This parameter is
ratio configurable only after the inverter is
shut down.
Self-load This parameter is used only during the
mode tests before shipment. This parameter is
configurable only after the inverter is
shut down.
Others screen
Figure 4-34 Others screen
NO TE
The EPO enable setting is available only for the UPS2000-G-15KRTL-01/UPS2000-
G-20KRTL-01. EPO is enabled for the UPS2000-G-6KRTS/UPS2000-G-10KRTS/
UPS2000-G-15KRTL/UPS2000-G-20KRTL by default.
Copyright © Huawei Technologies Co., Ltd.
4 Control Panel
Defa Value
ult Range
Value
80% 20%–
100%
Disabl Disabled,
ed Enabled
67