At+Mipldelete Delete Onenet Instance; At+Mipladdobj Add Lwm2M Object - Quectel BC26 Manual

<flag> Integer. The message indication. The range is 0-2. If <flag>=1, means the first
message of the configure bin. If <flag>=2, means the middle message ofthe configure
bin. If <flag>=0, means the last message of the configure bin.
<Ref> If configure the ONENET complete, will return a <Ref: id>.

7.2. AT+MIPLDELETE Delete OneNET Instance

The command is used to delete an OneNET communication instance.
AT+MIPLDELETE Delete OneNET Instance
Write Command
AT+MIPLDELETE=<Ref>
Parameter
<Ref> Reference ID of OneNET communication instance.

7.3. AT+MIPLADDOBJ Add LWM2M Object

The command is used to add LWM2M object.
AT+MIPLADDOBJ Add LWM2M Object
Execution Command
AT+MIPLADDOBJ=<Ref>,<objId>,<in
sCount>,<insBitmap>,<attrCount>,<a
ctCount>
Parameter
<Ref> Reference ID of OneNET communication instance.
<objId> Integer. Object identifier. If the object ID is not existed, the module will return ERROR.
<insCount> Integer. Instance count.
<insBitmap> Instance bitmap. For example, if <insCount>=3, and the <insBitmap>=101, means the
BC26_AT_Commands_Manual
Response
OK
If there is an error related to ME functionality:
ERROR
Response
OK
If there is an error related to ME functionality:
ERROR
NB-IoT Module Series
BC26 AT Commands Manual
64 / 73