Quectel BC26 Manual page 38

<Requested_eDRX_value>]]]
Read Command
AT+CEDRXS?
Test Command
AT+CEDRXS=?
Parameter
<mode> Integer type, indicates to disable or enable the use of eDRX in the UE. This parameter
is applicable to all specified types of access technology, i.e. the most recent setting of
<mode> will take effect for all specified values of <AcT>.
0
1
2
3
<AcT-type> Integer type; indicates the type of access technology. AT+CEDRXS? is used to specify
the relationship between the type of access technology and the requested eDRX
value.
0
1
2
3
4
5
<Requested_eDRX_value>
BC26_AT_Commands_Manual
If there is any error, response:
+CME ERROR:<err>
Response
+CEDRXS:<AcT-type>,<Requested_eDRX_value>
[<CR><LF>+CEDRXS:<AcT-type>,<Requested_eDRX_val
ue>
[...]]]
OK
Response
+CEDRXS:(list of supported <mode>s),(list of supported
<AcT-type>s),(list
<Requested_eDRX_value>s)
OK
Disable the use of eDRX
Enable the use of eDRX
Enable the use of eDRX and enable the unsolicited result code
+CEDRXP:<AcT-type>[,<Requested_eDRX_value>[,<NW-provided_eDRX_
value>[,<Paging_time_window>]]]
Disable the use of eDRX and discard all parameters for eDRX or, if available,
reset to the manufacturer specific default values.
Access technology is not using eDRX. This parameter value is only used in
the unsolicited result code.
EC-GSM-IoT (A/Gb mode)
GSM (A/Gb mode)
UTRAN (Iu mode)
E-UTRAN (WB-S1 mode)
E-UTRAN (NB-S1 mode)
String type; half a byte in a 4-bit format. NB-S1 mode.
bit
4 3 2 1
0 0 1 0
BC26 AT Commands Manual
of
E-UTRAN eDRX cycle length duration
20.48 seconds
NB-IoT Module Series
supported
38 / 73