Quectel BC26 Manual page 45

<pdp_type/cid>
pdp_type:
cid:
<apn>
<user_name>
<pwd>
<bearer_type>
<sim_id>
<cid>
<type>
<result>
<activated_pdp_type>
NOTES
This command name is temporary and may be changed in the future release.
BC26_AT_Commands_Manual
0 Deactivation requirement
1 Activation requirement
Integer type;
If <op> is 0, it is pdp_type. Otherwise, it is cid.
It is the pdp_type wanted to activate.
1 IPv4
2 IPv6
3 IPv4v6
4 Non-IP
It is a numeric parameter specifying a particular PDP context. Here it should
be equal to the <cid> returned by the activation response.
It is the access point name which is mandatory for the activation requirement
and should be omitted for the deactivation requirement.
It is the user name for access to the IP network which is mandatory for the
activation requirement and should be omitted for the deactivation
requirement.
It is the password for access to the IP network which is mandatory for the
activation requirement and should be omitted for the deactivation
requirement.
It is the type of bearer wanted to activate which is optional for the activation
requirement and should be omitted for the deactivation requirement.
1 NBIOT (Only NBIOT is supported currently)
It is the id of the SIM Card wanted to use which is optional for the activation
requirement and should be omitted for the deactivation requirement.
1 SIM Card 1 (Only SIM Card 1 is supported currently).
It is a numeric parameter specifying a particular PDP context.
0 Result/URC for deactivation requirement
1 Result/URC for activation requirement
2 URC for passive deactivation
0 failure
1 success
It is the pdp_type actually activated.
1 IPv4
2 IPv6
3 IPv4v6
4 Non-IP
NB-IoT Module Series
BC26 AT Commands Manual
45 / 73