At+Cedrxs Edrx Setting - Quectel BC26 Manual

Example
AT+CPSMS=1,,,"01000011","01000011"
OK
AT+CPSMS?
+CPSMS:1,,,"01000011","01000011"
OK
AT+CPSMS=?
+CPSMS:(0-2),,,( "00000000"-"11111111"), ("00000000"-"11111111")
OK

2.19. AT+CEDRXS eDRX Setting

The write command controls the setting of the UEs eDRX parameters. The command controls whether
the UE wants to apply eDRX or not, as well as the requested eDRX value for each specified type of
access technology.
The write command also controls the presentation of an unsolicited result code +CEDRXP:
<AcT-type>[,<Requested_eDRX_value>[,<NW-provided_eDRX_value>[,<Paging_time_window>]]] when
<n>=2 and there is a change in the eDRX parameters provided by the network.
A special form of the command can be given as +CEDRXS=3. In this form, eDRX will be disabled and
data for all parameters in the command +CEDRXS will be removed or, if available, set to the manufacturer
specific default values.
AT+CEDRXS eDRX Setting
Write Command
AT+CEDRXS=[<mode>,[,<AcT-type>[,
BC26_AT_Commands_Manual
timer is deactivated<Requested_Active-Time>
type; one byte in an 8 bit format. Requested Active Time value
(T3324) to be allocated to the UE. The requested Active Time
value is coded as one byte (octet 3) of the GPRS Timer 2
information element coded as bit format (e.g. "00100100" equals 4
minutes). For the coding and the value range, see the GPRS
Timer 2 IE in
3GPP TS 24.008.
3GPP TS 23.060 [47] and 3GPP TS 23.401 [82]. The default
value, if available, is manufacturer specific.
Response
OK
NB-IoT Module Series
BC26 AT Commands Manual
1 1 1 value indicates that the
3GPP TS 24.008 [8]
See also 3GPP TS 23.682 [149],
String
Table 10.5.163/
37 / 73