AT+QFTPSIZE Get the File Size on FTP Server
Test Command
AT+QFTPSIZE=?
Write Command
AT+QFTPSIZE=<file_name>
Parameter
<file_name>
<file_size>
<err>
<protocol_error>
2.8. AT+QFTPDEL Delete the File on FTP Server
Delete file on FTP server. If "OK" is returned, "+QFTPDEL: <err>,<protocol_error>" should be output in
<timeout> set by AT+QFTPCFG. Otherwise, you should close the FTP connection, deactivate and
reactive the network.
AT+QFTPDEL Delete the File on FTP Server
Test Command
AT+QFTPDEL=?
Write Command
AT+QFTPDEL=<file_name>
WCDMA_UGxx_FTP_AT_Commands_Manual
Response
+QFTPSIZE: <file_name>
OK
Response
OK
If successfully get the file size:
+QFTPSIZE: 0,<file_size>
Else fail to get the file size:
+QFTPSIZE: <err>,<protocol_error>
or
+CME ERROR: <err>
String type, the file name in FTP server. The maximum size of the parameter is 50
bytes
Integer type, the size of file on FTP server
Integer type, indicates the operation error code. It is the type of error (Please refer
to the Chapter 4)
Integer type, for reference only, indicates the original error code from FTP server
which is defined in FTP protocol (Please refer to Chapter 5). If it is 0, it is
meaningless
Response
+ QFTPDEL: <file_name>
OK
Response
OK
UMTS/HSPA Module Series
WCDMA UGxx FTP AT Commands Manual
Confidential / Released
21 / 44