(Opc) Belt Cartridge; (Opc) Belt Cartridge Message; Replacing The (Opc) Belt Cartridge - Brother HL-2400C Series User Manual

(OPC) Belt Cartridge

(OPC) Belt Cartridge Message

When the (OPC) Belt Cartridge runs out, the following message appears
on the LCD panel. When you see this message, you need to replace the
(OPC) Belt Cartridge.
!
Caution


Do not touch the surface of the (OPC) Belt Cartridge. If you touch it,
it might cause print quality reduction.


Do not expose the (OPC) Belt Cartridge to light (more than 800 lux)
for more than 2 minutes. If you do, it might cause reduction of print
quality.


Be sure to open the printer Front Cover when you handle the (OPC)
Belt Cartridge.


Damage caused by improper handling of the (OPC) Belt Cartridge
may void your warranty.

Replacing the (OPC) Belt Cartridge

1. Press the Power button and turn the printer off.
2. Open the Front Cover and the Top cover.
3. Pull the green Belt Cartridge Lock Levers on both sides toward you
to release the lock.
Fig. 5-11 Release the Belt Cartridge Lock Levers
REPLACE OPC BELT
CHAPTER 5 MAINTENANCE
5-13