Ibm Proprinter Xl Mode - Brother HL-2400C Series User Manual

IBM Proprinter XL Mode

Command name Function
Null Ignored
Bell Ignored
Space Moves the cursor one character to the right
Backspace Moves the cursor one character to the left
Line Feed Moves the cursor to the next line
Form Feed Prints the data in the buffer and ejects the
page (if the buffer is empty, this command
is ignored)
Carriage Return Moves the cursor to the left margin on the
current line. If Auto LF has been set from
the front panel or by software (ESC 5 1),
the cursor will move down one line
Set/Cancel Auto Sets (n=1) or cancels (n=0) auto line feed
Line Feed Mode Overrides the front panel setting
Select Printer Selects printer following deselection
(ESC Q)
Deselect Printer Ignored
Deselect Printer Deselects printer, which will not accept
data until a DC1 is received
Set Epson Selects Epson FX-850 emulation mode.
Emulation Mode All data in the buffer is printed and the
page ejected
Change Emulation Changes the emulation of the printer. All
(original) data received so far will be printed and
the page ejected. m is an ASCII code.
m=AB - BR-Script 2 Batch Mode
m=AI - BR-Script 2 Interactive Mode
m=E - Epson Mode
m=GL - HP-GL Mode
m=H - HP LaserJet Mode
m=I - Reset IBM Proprinter Mode
User Reset Restore to User Settings
(n=0 to 2)
Paper Input Control Controls the paper input
n=0 - Feed From Manual Feed Slot
n=1 - Feed From MP Tray
n=2 - Feed From Upper Cassette (Tray 1)
n=3 - Feed From Lower Cassette (Tray 2)
n=R - Eject Paper
Duplex/Simplex Print Sets simplex or duplex print mode
(available when duplex n=0 - Simplex
unit is installed) n=1 - Duplex & long edge binding
(original) n=2 - Duplex & short edge binding
Page Side Selection Sets page side selection
(available when duplex n=0 - Next side
unit is installed) n=1 - Front side
(original) n=2 - Back side
Set Form Length Sets form length to n lines at current
spacing (1
Sets from length to n inches at current
spacing (0
Set Right and Left n1 is used to set the left margin, and n2
Margins the right margin (1
Set Skip-over Sets bottom margin at n-th line, counting
Perforation from the bottom (1



n 255)



n 15)




n1 n2 255)



n 255)
Sequence Decimal Hexadecimal
NUL 0 00
BEL 7 07
SP 32 20
BS 8 08
LF 10 0A
FF 12 0C
CR 13 0D
ESC 5 n 27 53 n 1B 35 n
DC1 17 11
DC3 19 13
ESC Q 2 2 27 81 50 50 1B 51 32 32
ESC Q 3 27 51 51 1B 51 33
ESC @ 27 64 1B 40
ESC CR m 27 13 m 1B 0D m
ESC CR ! 27 13 33 1B 0D 21
n R n 82 n 52
ESC EM n 27 25 n 1B 19 n
ESC CR ! 27 13 33 1B 0D 21
n D n 68 n 44
ESC CR ! 27 13 33 1B 0D 21
n S n 83 n 53
ESC C n 27 67 n 1B 43 n
ESC C 0 n 27 67 48 n 1B 43 30 n
ESC X n1 n2 27 88 n1 n2 1B 58 n1 n2
ESC N n 27 78 n 1B 4E n
APPENDICES
A-63