Brother HL-2400C Series User Manual page 181

USER'S GUIDE
Operator Call Message
XX LOAD PAPER
***** SIZE
T1 MANUAL FEED
***** SIZE
19 CHECK FONT
20 FONT REMOVAL
22 WASTE TONER
23 OIL EMPTY
24 CHANGE FCR
25 NO FUSER UNIT
27 NO OPC BELT
28 NO FC ROLLER
6–2
Meaning
The wrong size of paper was
loaded in the Media Cassette.
XX is T1/ T2.
The printer requests you to
load paper manually.
An error occurred in the
optional font card.
The PCMCIAcard was
removed while the printer is
on-line.
The Waste Toner Pack is full. Replace the Waste Toner Pack
The Oil in the Oil Bottle is
empty.
It is time to replace the Fuser
Cleaner.
The Fixing Unit is not
installed correctly.
The (OPC) Belt Cartridge is
not installed correctly.
The Cleaning Roller is not
installed correctly.
Action
Load the requested size of
paper in the Media Cassette
and press the Form Feed
button.
Load the requested size of
paper on the Standard Media
Cassette and press the Sel
button.
Turn off the printer, and re-
install or replace the optional
font card.
Turn off the printer, install the
card, and turn on the printer.
The Continue button will
allow you to temporarily
ignore this message.
with a new one.
Replace the Oil Bottle with a
new one.
Replace the Fuser Cleaner
with a new one.
Install the Fixing Unit
correctly.
Install the (OPC) Belt
Cartridge correctly.
Install the Cleaning Roller
correctly.