About Maintenance Messages - Brother HL-2400C Series User Manual

USER'S GUIDE
Current Emulation
"##"... Fixed emulation expressed with double figures
"LJ"... AUTO HP PCL5C emulation
"BS"... AUTO BR-Script 2
"GL"... AUTO HP-GL emulation
"FX"... AUTO EPSON FX-850 emulation
"PR"... AUTO IBM Proprinter XL emulation

About Maintenance Messages

4–4
LJ PRINT 002 L T1
AUTO
Copy Pages Orientation
Fig. 4-2 Display
This printer has some maintenance parts that need replacing. The printer
counts the number of printed pages and detects the life of each of the
maintenance parts. When the life of a maintenance part comes close to it's
end, the following messages appear on the lower row of the LCD panel.
These messages will over-write the Emulation Mode status information.
Maintenance Message





K
FUSER OIL LOW
REPLACE FCR
REPLACE OPC BELT
REPLACE FUSER
REPLACE 120K KIT
*1 - After replacing these parts, you have to reset the parts life counter so
that the printer can count the parts life correctly. See "Maintenance"
in Chapter 5.
K C M Y
Toner Level


"P"... Portrait : sufficient toner


(blinking
"L"... Landscape


-disappear: toner empty
Emulation Mode
AUTO: Auto emulation selection
PCL5C: HP PCL5C fixed
BRScript: BR-Script fixed
HP-GL: HP HP-GL fixed
FX-850: Epson FX-850 fixed
Pro.XL: IBM Proprinter XL
Meaning


When the
indicated color toner is nearly
empty. K: Black, C: Cyan, M:
C M Y
Magenta, Y: Yellow.When the
toner becomes empty the
indication disappears.
Oil in the Oil Bottle is nearly
empty.
*1 Time to replace the Fuser Cleaner.
*1 Time to replace the (OPC) Belt
Cartridge.
*1 Time to replace the Fixing Unit.
*1 Time to replace the Drum Cleaner,
the Paper discharger and the
Transfer Roller.
Paper Source
"T1"... Tray 1
"T2"... Tray 2
"MN"... Manual Feed


): toner nearly empty
Status


mark blinks ( ), the