Feeder Button; Feeder - Brother HL-2400C Series User Manual

USER'S GUIDE

FEEDER Button

4–64
You can select the feeder and manual feed mode with the Feeder button.
Display Message
FEEDER=AUTO
MANUAL MODE=ON
MEDIA TYPE
SMALL SIZE
You can check the current feeder.
When you want to change settings with the Feeder button, hold down
the Shift button and press the Feeder button. You will then enter the
setting mode where you change the feeder, manual feed mode, etc.

FEEDER

To select the feeder, follow these steps:
1. Press the Sel button to set the printer off-line.
2. Hold down the Shift button and press the Feeder button.
When you enter the setting mode, the display first shows the current
feeder setting with the asterisk.
3. Press the or button until the desired feeder appears on the
display.
Display Message
FEEDER=AUTO
FEEDER=TRAY1
FEEDER=TRAY2
Feeder
Select a feeder or auto paper feed.
Enable/disable the manual feed
mode.
Select print media
Set the small paper size detection
of sizes under B5(JIS)
Paper Feed Method/Paper Source
Auto paper feed
Upper Media Cassette (Tray 1)
Optional Lower Media Cassette
(Tray 2)