Copy Button - Brother HL-2400C Series User Manual

COPY Button

You can set the number of copies to print of the same page with the
Copy button. The computer will release from a printing job in a shorter
time if you use this feature than when you set the copy print quantity with
your application software. Check the current setting on the display.
When the number of copies has been set to 3, the display may look as
follows:
Note
If you send too many pages to be stored in the printer memory, part or all
of the set of pages or copies may not be printed.
To set the number of copies, follow these steps:
1. Press the Sel button to set the printer off-line.
2. Hold down the Shift button and press the Copy button.
When you enter the setting mode, the display first shows the current
setting with the asterisk.
3. Press the
display.
4. Press the Set button to make the displayed selection effective.
An asterisk appears at the end of the display for a short time. Then the
printer automatically exits from the setting mode to the off-line state.
LJ READY 003P T1
AUTO
or button until the desired number appears on the
Display Message
COPY PAGES= 1
COPY PAGES= 2
...
COPY PAGES=999
CHAPTER 4 CONTROL PANEL
# of Copies to Print Same Pages
1 page
2 pages
. . .
999 pages (max.)
4–67