Brother HL-2400C Series User Manual page 83

USER'S GUIDE
Display Message
DTR(ER) =ON
(Effective when
Xon/Xoff=ON)
Robust Xon =OFF
(Effective when
Xon/Xoff=ON)
4–20
Parameters
Data terminal ready
(ER)
Robust Xon
Extended I/O Interface
If you have installed a commercial modular input/output (MIO) card in
the printer, you can select the extended I/O interface in this mode. If the
installed MIO card requires any optional interface settings, they appear
under this menu. Set them, referring to the manual of the MIO card.
Note
This setting appears only when the MIO card has been installed. For
installation of the MIO card, see the Network manual.
The network card may be pre-installed on some HL-2400C series models.
Settings
ON: Makes DTR (ER) low when
the buffer is full.
OFF: Does not make DTR (ER)
low when the buffer is full.
DTR(ER) goes low only
when the printer is off-line.
ON: Sends Xon while waiting.
OFF: Sends Xon once, when the
printer status changes from
off-line to on-line.