Operating And Storage Environment; Power Supply; Environment - Brother HL-2400C Series User Manual

Operating and Storage Environment

Please take note of the following before using the printer.

Power Supply

Use the printer within the specified power range.
AC power:
Frequency:
The power cord, including extensions, should not exceed 5 meters (16.5
feet).
Do not share the same power circuit with other high-power appliances,
particularly an air conditioner, copier, shredder, etc. If it is unavoidable
that you must use the printer with these appliances, we recommend you
use a voltage transformer or a high-frequency noise filter.
Use a voltage regulator if the power source is not stable.

Environment

Use the printer only within the following ranges of temperature and
humidity.
Ambient temperature: 10°C to 32.5°C (50°F to 90.5°F)
Ambient humidity:
Do not block the air exit on top of the printer. Do not place objects on top
of the printer, especially on the air exit.
Ventilate the room where you use the printer.
Do not place the printer where it is exposed to direct sunlight. Use a blind
or a heavy curtain to protect the printer from direct sunlight if the printer
is unavoidably set up near a window.
Do not install the printer near devices that contain magnets or generate
magnetic fields.
Do not subject the printer to strong physical shocks or vibrations. Do not
expose the printer to open flames or salty or corrosive gasses.
Place the printer on a flat, horizontal surface.
Keep the printer clean. Do not install the printer in a dusty place.
Do not install the printer near an air conditioner.
±10% of the rated power voltage
50/60 Hz (120V or 220-240 V)
20% to 80% (without condensation)
CHAPTER 1 INTRODUCTION
1-7