Page Format Mode - Brother HL-2400C Series User Manual

Note on "AUTO MASK"
When you use application software in non-HP modes, be sure to set
"AUTO MASK" to ON. When you use letter- or A4-size paper, the top
and bottom 2 lines are masked and they do not appear on the printout.
The auto modes are subject to the current emulation mode.
O : The auto modes can be set.
X : The auto modes cannot be changed and no setting appears.
— : The auto modes are not available.
AUTO Mode HP
PCL5C
O OFF
AUTO LF
O OFF
AUTO CR
O OFF
AUTO WRAP
O ON
AUTO SKIP
—
AUTO MASK
Note
In the IBM emulation mode, FF codes are always followed by a CR code.

PAGE FORMAT MODE

Notes
The settings in this mode menu vary as follows:

All settings are effective in the HP PCL5C, EPSON FX-850, and IBM
Proprinter XL modes.

The X and Y (vertical and horizontal) offsets are effective in the BR-
Script 2 mode. Other settings are not effective and they do not appear
in this mode.

The paper size and the X and Y (vertical and horizontal) offsets are
effective in the HP-GL mode. Other settings are not effective and they
do not appear in this mode.
Printer Emulation (Factory settings in bold print)
EPSON
FX-850
O OFF
X ON
X ON
—
O OFF
CHAPTER 4 CONTROL PANEL
IBM
Proprinter XL
O OFF
O OFF (Note)
X ON
—
O OFF
4–23