Making Copies; Copy Options; Stop Copying; Improving Copy Quality - Brother MFC-J285DW Advanced User's Manual

7

Making copies

Copy options

You can change the copy settings for the next
copy.
These settings are temporary. The machine
returns to its default settings one minute after
copying.
To change a setting, press Copy, press
Options, and then press s or t on the
Touchpanel to scroll through the copy
settings. When the setting you want is
displayed, press it and choose your preferred
option.
When you are finished choosing settings,
press Black Start or Color Start.
NOTE
You can save some of the settings you
use most often by setting them as the
default settings. These settings will stay
until you change them again. (See Setting
your changes as the new default
on page 36.)

Stop copying

To stop copying, press
7
7
.

Improving copy quality

You can choose the copy quality. The factory
setting is Normal.
If you choose Normal or Fast, you can only
choose Plain Paper in Paper Type.

Normal
Normal is the recommended mode for
ordinary printouts. This produces good
copy quality with good copy speed.

Best
Use Best mode to copy precise images
such as photographs. This provides the
highest resolution and slowest speed.

Fast
Fast copy speed and lowest amount of ink
used. Use to save time printing
documents to be proof-read, large
documents or many copies.
a
Load your document.
b
Press (Copy).
c
Enter the number of copies you want.
d
Press Options.
e
Press s or t on the Touchpanel to
display Quality.
f
Press Quality.
g
Press Fast, Normal or Best.
h
Press OK.
i
If you do not want to change additional
settings, press Black Start or
Color Start.
j
Press .
7
7
7
29