Errors During The Restore Process; Reset - Siemens LME7 Series Manual

Alternately with
or with
or with
Β
Note:
During the restore process, all settings and parameters are written from the program module to
the basic unit's onboard memory. In the process, it is possible that previous program
sequences, parameters and settings in the onboard memory will be overwritten!
nfo
>1 s
Β
Note:
For meaning of the error and diagnostic codes, see chapter Error code list...
Building Technologies

15.8.1 Errors during the restore process

15.8.2

Reset

Basic Documentation LME7...
15 Operation via internal LED
Display shows alternately rSt and Er1, Er2 or Er3.
For meaning of a possible cause, see chapter Error code list
with operation via internal LED.
nfo
When pressing for 1...3 seconds, OFF is displayed.
When the button is released, the basic unit is reset.
103/106
CC1P7105en
17.04.2018