Fault Status Messages, Display Of Errors; Display Of Errors (Faults) With Lockout - Siemens LME7 Series Manual

Alternately
+
or
-
A
Building Technologies
15.4

Fault status messages, display of errors

15.4.1

Display of errors (faults) with lockout

Basic Documentation LME7...
15 Operation via internal LED
Display shows alternately Loc and 4.
Unit is in the lockout position.
The current error code is displayed and the signal lamp is
blinking red.
Example: Error code 4
+ -
Press or for display of the phase, where the fault
appeared.
Signal lamp blinks red.
Example: Phase P02
Only with modulation via analog signal
A
Press for display of the output position / actuator
position where the error occurred.
Signal lamp lights up red.
Example: Output position / actuator position 49
92/106
CC1P7105en
17.04.2018