Typographical Conventions; Safety Notes - Siemens LME7 Series Manual

Qualified personnel
Correct use
Building Technologies

1.9 Typographical conventions

1.9.1 Safety notes

This Basic Documentation contains instructions which must be observed to ensure your
own personal safety and to prevent damage to equipment and property. The
instructions and notes are highlighted by warning triangles or a hand symbol and are
presented as follows, depending on the hazard level:
Warning
Caution
Note
Only qualified personnel are allowed to install and operate the equipment. Qualified
personnel in the context of the safety-related notes contained in this document are
persons who are authorized to commission, ground and tag devices, systems and
electrical circuits in compliance with established safety practices and standards.
Note the following:
The device may only be used on the applications described in the technical
documentation and only in connection with devices or components from other suppliers
that have been approved or recommended by Siemens.
The product can only function correctly and safely if shipped, stored, set up and
installed correctly, and operated and maintained as specified.
Basic Documentation LME7...
1 Safety notes
means that death, severe personal injury or substantial
property damage can occur if adequate precautionary
measures are not taken.
means that minor personal injury or property damage
can occur if adequate precautionary measures are not
taken.
draws your attention to important information on the
product, on product handling, or to a special part of the
documentation.
15/106
CC1P7105enr
17.04.2018