Changing The Oem's Password - Siemens LME7 Series Manual

/reset
/reset
/reset
Building Technologies
13.8.3

Changing the OEM's password

Basic Documentation LME7...
13 Operation via AZL2
Parameter 042: blinks.
Press to go to level c: for password changes.
/reset
Letter c: for confirmation appears blinking.
Proceed as described in section Entering the password
and enter the former password.
After entry of the last character, the password must be
confirmed by pressing
/reset
Letter n: for new appears blinking.
Proceed as described in section Entering the password
and enter the new password (5 characters).
After entry of the last character, the password must be
confirmed by pressing
/reset
Letter r: for repeat appears blinking.
Proceed as described in section Entering the password
and repeat entry of the new password.
After entry of the last character, the password must be
confirmed by pressing
/reset
SEt confirms that the new password has been saved.
Parameter 042: blinks again.
.
.
.
CC1P7105en
17.04.2018
73/106