Advertisement
24 Operation principle and hardware description
signs. The main selections are described below. Not all selections are available for all types.
For more information, refer to ACS880 multidrive ordering information, available on request.
Code
Description
B054
IP42 (UL Type 1 Filtered)
C121
Marine construction
C128
Air inlet through bottom of cabinet
C129
UL Listed (evaluated to both U.S. and Canadian safety requirements)
E208
Common mode filtering
F286
DC switch-disconnector
G300
Cabinet and module heating elements (external supply)
G301
Cabinet lighting
G304
Control (auxiliary) voltage 115 V AC
G313
Output for motor space heater (external supply)
G327
Ready light on door, white
G328
Run light on door, green
G329
Fault light on door, red
G330
Halogen-free wiring and materials
G338
G339
G340
Additional wire markings
G341
G342
H350
Bottom power cable entry
H351
Top power cable entry
H353
Motor cabling direction up
H359
Common motor terminal cubicle
H366
Common output terminals (for inverter modules mounted in the same cubicle)
J400
ACS-AP-W control panel (with Bluetooth)
J401
LED monitoring display
J410
Control panel mounting platform
K450
Panel bus (control of several units from one control panel)
K451
FDNA-01 DeviceNet™ adapter module
K452
FLON-01 LonWorks
K454
FPBA-01 PROFIBUS DP adapter module
K457
FCAN-01 CANopen adapter module
K458
FSCA-01 RS-485 (Modbus/RTU) adapter module
K462
FCNA-01 ControlNet™ adapter module
K469
FECA-01 EtherCat adapter module
K470
FEPL-02 EtherPOWERLINK adapter module
K473
FENA-11 Ethernet adapter module for EtherNet/IP™, Modbus TCP and PROFINET IO protocols
FENA-21 Ethernet adapter module for EtherNet/IP™, Modbus TCP and PROFINET IO protocols,
K475
2-port
K480
Ethernet switch for PC tool or control network (for max. 6 inverter units)
®
adapter module
Advertisement
