Advertisement
Dimensions
Cabinet line-up dimensions
The drive consists of cubicles built into a cabinet line-up. The table below shows the nominal
width and weight of each inverter type. The dimensions are in millimeters (for inches, divide
by 25.4).
Notes:
• The side panels at the left and right ends of the line-up increase the nominal line-up width
by 30 millimeters (1.2").
• The standard depth of the cabinet line-up is 644 mm (25.35") excluding protruding
equipment such as handles.
• UL Listed (+C129) units are top cable entry/exit by default.
• Top cable exit increases the height (and free top space requirement) of the cabinet line-up
by 50 mm (2"). Depending on the configuration, top cable exit will also increase either
the width or depth of the cabinet line-up.
• The control electronics of the inverter unit must partly be housed outside the inverter
module cubicles.
The table is followed by selected dimension drawing examples.
Dimensions 125
11
Advertisement
